مشخصات

• اندازه صفحه نمایش: 1.3 اینچ
• رزولوشن: 64*128
  
• تغذیه: 3-5 V
  
• پروتکل SPI
• دمای کاری : -40 ℃ ~ 80 ℃

• No backlight: The display unit can emit light;
• Wide voltage support: no need to modify any direct support 3V ~ 5V DC;
• SPI serial communication: display speed, stable performance;
• Large viewing angle: maximum viewing angle of 160 °;
• Support a large number of control chip: fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip (a large number of routines for reference);
• Ultra-low power: full-screen when the light 20mA, normal full-screen display Chinese characters 12mA (far lower than TFT, LCD and other technologies);
• Industrial grade Operating temperature: -40 ℃ ~ 80 ℃;
• Small size: 96-inch screen size of 27.0MM * 27.0MM * 3.6MM, 1.3-inch Dimensions 35.5MM * 32MM * 3.6MM;
• Rich lead interface: the module default use 54mm single pin as a communication interface, reserved for 0.5mm pitch FFC interface, the user in the design of their own PCB can be more flexible.

•  

   

PCB: 35mm x 35mm x 5mm / 1.4" x 1.4" x 0.2"

Mounting Hole Dimensions: 29.5mm x 29mm / 1.16" x 1.14"

Mounting Hole Diameter: 2.5mm / 0.1"

Screen: 23mm x 35mm / 0.9" x 1.4"

Weight: 8.5g

This board/chip uses I2C 7-bit address between 0x3C-0x3D, selectable with jumpers

• OLED Display Details:

Diagonal Screen Size：1.30"

Number of Pixels：128 × 64

Color Depth：Monochrome (White)

Module Construction：COG

Module Size (mm)：34.50 x 35.00

Panel Size (mm)：34.50 x 23.00 x 1.45

Active Area (mm)：29.420 x 14.70

Pixel Pitch (mm)：0.23 x 0.23

Pixel Size (mm)：0.21 x 0.21

Weight (g)：2.18

Duty：1/64

Brightness ( cd/m2)：100 (Typ) @ 12V

Display current draw is completely dependent on your usage: each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~25mA or so in practice but for precise numbers you must measure the current in your usage